Home / Products / Diamond Wire Cutting Machine / SGI 20
SGI 20
SGI 20 is an contour cutting machine used for cutting and processing silicon, glass, sapphire, quartz, jade, and other materials into irregular shapes using diamond wire.
This contour cutting machine uses a gantry structure, and the cutting wire cuts from top to bottom. It is very convenient to load the workpiece. It only needs to be glued to the loading table, and the cut part will not fall after the cutting wire cuts through the material, so there is no need for workers to take care of it. It only needs to be processed after the equipment program is completed or the next day.
Complex shapes are drawn with CAD software, and the software includes CAM graphic editing (straight lines, arcs, oblique lines) for importing. Through a high-speed rotating diamond wire, this equipment achieves a processing technique for cutting workpieces. It is a new type of equipment with reliable functionality, high cutting efficiency, and high processing accuracy.
| No. | Item | Content |
|---|---|---|
| 1 | Loading Worktable Size | 200*250 mm |
| 2 | Y-axis, Z-axis Travel | 250*250 mm |
| 3 | Maximum Product Size | 200*250 *250 mm |
| 4 | Worktable Load | 40 Kg |
| 5 | Maximum Lina Speed | 2500 m/min |
| 6 | Maximum Processing Efficiency | 1000 mm/min |
| 7 | Diamond Wire Diameter | ∮0.35～0.8 mm |
| 8 | Positioning Accuracy | ±0.01 mm |
| 9 | Processing Accuracy | ≤0.03 mm |
| 10 | Surface Roughness (Ra) | Ra ≤ 60μm |
| 11 | Diamond Wire Length | 2920 mm |
| 12 | Main Guide Wheel Diameter | ∮260 mm |
| 13 | Subsidiary Guide Wheel Diameter | ∮180 mm (4 pieces) |
| 14 | PC Monitor Size | 19 inches |
| 15 | Equipment Power | 4.5 KW |
| 16 | Operating Voltage | 220V 50Hz ±10％ |
| 17 | Ambient Temperature | 10℃～30℃ |
| 18 | Equipment Dimensions | 800*850*1920 mm |
The cutting tool used by the equipment is also the latest ring-shaped diamond wire. By forming the diamond wire into a closed loop, the one-way movement of the cutting wire is achieved, which greatly improves the linear speed and the smoothness of the cutting surface. It is a cutting machine with good precision .
Diamond Wire Loop has 3 different types: Full coating ,Segment Coating and Thread Coating. Each has it’s advanagtes.
Click here to learn more about Cutting wire loops.
SGI 20 Contour Cutting Machine
Customer On-site Cutting Effect Showcase
Click To Watch More Videos Showing Our Cutting Machine In Action.
The Difference between SG I20 diamond wire saw cut machine and other types
The equipment capable of cutting shapes typically includes electrical discharge machining (EDM), laser cutting, water jet cutting, diamond wire cutting, and engraving. Electrical discharge machining requires materials to be conductive for cutting, while laser and water jet cutting are limited by material thickness—if it’s too thick, penetration may be insufficient. Engraving also has requirements regarding material thickness. Diamond wire cutting, however, has no restrictions on the type of material being cut.
Diamond wire cutting and electrical discharge machining (EDM) are often compared because they both fall under the category of wire cutting. Here’s a comparison between these two cutting methods
Comparison of Diamond Wire Cutting and EDM Wire Cutting
| Characteristics | Diamond Wire Cutting | EDM Wire Cutting |
|---|---|---|
| Material Compatibility | Suitable for various materials | Limited to conductive materials |
| Cutting Speed | Fast | Relatively slow |
| Material Thickness | Not limited | Limited by material thickness |
| Precision | High | High |
| Heat Generation | Low | None |
| Wire Breakage | Susceptible | Minimal |
| Operating Costs | Moderate to high | Moderate to high |
| Maintenance | Requires frequent wire replacement | Potential for electrode wear |
| Application Flexibility | Suitable for complex shapes | Suitable for complex shapes |
| Waste Material | Minimal | Minimal |
Optoelectronics
contour cutting machine
The cutter is employed to shape synthetic sapphire and other crystals used in LED and laser technologies.
Optoelectronics
contour cutting machine
The cutter is employed to shape synthetic sapphire and other crystals used in LED and laser technologies.
Jewelry and Luxury Goods
contour cutting machine
Crafting of large gemstones and sapphire glass for watches and high-end electronics displays.
Ceramic industry
contour cutting machine
This machine model can cut industrial ceramic such as Alumina (Aluminum Oxide), Silicon Carbide, Zirconia, Cordierite, Titanate…
Semiconductor Industry
contour cutting machine
This machine is used for slicing quartz and other crystal substrates, which are foundational for semiconductor wafers and chips.
Compact and Clean Design
Ease of Operation
High Precision Cutting
Superior Alternative to Inner-Circle Slicers
Safty
Eco-friendly
What is the maximum thickness the machine can handle for cutting?
What is the difference between this wire saw and ID SAW?
Their cutting tools differ; one uses a diamond wire and the other a blade, making one a flexible cutting method and the other a rigid cutting approach. Furthermore, inner-circle slicers limit the workpiece size to be smaller than the blade’s inner diameter, whereas SHINE OptiGantry Wire Saw does not have this restriction.
English 
German 
Spanish 
French 
Japanese 
Korean 
Vietnamese