Как уменьшить сколы при использовании проволочной пилы для стекла
Cutting glass is tricky. It can chip or break. To get smooth cuts, you need the right Glass Wire Saw. You should cut slowly. A steady hand helps. A sharp blade is key. A soft cut looks better. It also saves glass. A chipped edge does not look good. Using the proper steps helps. Following the right tips makes cutting easier. Pick the Exact Blade for Clean Cut The blade you pick is vital. It decides how clean and smooth your cut will be. A fine-grit blade is the best choice. It cuts gently through the glass and lowers the chance of chipping. A rough blade can cause cracks and jagged edges. This can ruin your work. The right blade makes cutting glass easy and safe. Set the Right Speed to Avoid Cracks and Chips The speed of your glass saw matters a lot. It affects how clean your cut
